(Tested) How To Install/flash lineage Os ROM On Any Android Device with CWM recovery

0
129
(Tested) How To Install flash lineage os ROM On Any Android Device
(Tested) How To Install flash lineage os ROM On Any Android Device

With the breakup and shut down of Cyanogen Inc, CyanogenMod — Android’s most popular ROM — is also being discontinued. Of course, the advantage of an open source project is that it never really dies, and so Lineage OS is picking up where CyanogenMod left off (hence the lineage, get it?). The new OS is just a few weeks old, so many things are still falling into place. After having received a definitive name, Lineage OS is now getting an official new logo as well.

This guide will show you how to install or flash lineage os rom on your android device using custom recovery like twrp or cwm. Before starting make sure to complete below task:

Before Starting

Take care of following tasks before you proceed with flashing lineage Os Custom Rom:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settingsas well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.

See Also: Flash Lineage Os With TWRP

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash lineage os rom on any Android device using CWM recovery.

Step 1: Download the ROM zip file and copy it on root of the SD card of your device. Also copy the GApps zip file, if you want to install Google Apps too.

Download Google apps (gapps) for lineage os roms

Step 2: Disconnect your device from the computer and boot it into CWM recovery mode:

  1. Switch off your device
  2. Press & hold Volume buttons + Power button to boot into bootloader mode (Note: button combination may vary depending on your device)
  3. Now select “Recovery” option using Power button to boot into CWM recovery mode

You are now in CWM recovery more. Use volume keys to navigate up & down and use Power button to select an option.

Step 3 (Optional but important): Take a NANDROID backup of your ROM:

  1. From Recovery screen, select “Backup and Restore
  2. Now select “Backup” to start the nandroid backup process.

After backup is done, navigate back to main recovery screen.

Step 4: Now select “wipe data/factory reset” option. When it asks for confirmation, select “Yes” to confirm data wipe process. Then navigate back to main recovery.

Step 5: Now you will install the ROM zip file that you placed to SD card of your device in step 1. Follow these steps:

  1. Select option “install zip from sdcard
  2. Then select “choose zip from sdcard
  3. Now select the zip file that you want to install (the file that you copied onto the SD card)
  4. When it asks for confirmation, select “Yes” to start installation

The custom ROM installation will now begin. Wait for it till its complete.

Note: If you copied any other zip file alongside the ROM file (like GApps zip), repeat the above steps to install that zip file.

Step 6: After installation is complete, navigate back to main recovery screen and select “reboot system now” option to reboot your device.

Your device will now reboot. Please note that first boot may take some time, so be patient and do not interrupt the boot process.

When it boots up, your device will have custom ROM installed. Same steps can be followed to install any zip file like Google Apps on your device.